System-fidelity CD-250 User Manual download pdf (Page 7)

About connection to the mains

Do not turn on the power before all connections have been made correctly.

Check that all connections have been made correctly before turning on the

power.

Check that the mains voltage is 230-240V AC50Hz before turning on the power.

Check that all other connections have been made correctly before inserting the mains plug into the

wall socket.

Then insert the plug into a suitable socket.

If the unit is to be used abroad, you may need an adapter.

REMOTE CONTROL

Installation of batteries

Remove the cover at the back.

Position two batteries of the type AAA/R03/UM4 in the battery compartment. Make sure that the

orientation of the batteries is correct (see drawing at bottom).

Do not mix new and old batteries and do not use different types of batteries.

If the remote control is not used for prolonged periods, remove the batteries from the remote control

to avoid corrosion.

Using the remote control

Direct the remote control at the sensor on the front

panel of the amplifier. When the remote control signal is received, the

unit reacts accordingly. The remote control works within a range of

6m.

Sometimes the remote control may not work well in direct strong

light. You may have to move the amplifier if it is a problem.

Malfunction may occur if remote controls of some other equipments

are used near the amplifier.

Do not place any objects on the remote control, as the batteries may

become flat if a key is depressed constantly.

Make sure that there are no obstacles between remote control and

amplifier.

Do not position the amplifier behind tinted glass as it may reduce

the maximum range of the remote control.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

No comments

System-fidelity CD-250 User Manual Page 7